Author Topic: event_arrive = none and IRD  (Read 80 times)

Offline vmc

  • Jr. Member
  • **
  • Posts: 69
  • Karma: 0
event_arrive = none and IRD
« on: June 14, 2018, 05:20:49 PM »
What event_arrive is set to none, when a strategy is loaded on a DN group, should those RPs with this set for a particular URS show blank (ie not actually load a strategy under that URS)? 

I thought that was the case but I can't get this environment to do that and I suspect URS is not honouring the event_arrive option.  I'm getting a number of call collisions and repeated strategy starts.

Sent from my Redmi Note 3 using Tapatalk


Offline vmc

  • Jr. Member
  • **
  • Posts: 69
  • Karma: 0
Re: event_arrive = none and IRD
« Reply #1 on: June 14, 2018, 05:22:10 PM »
Sorry that should start with "When" not "What"

Sent from my Redmi Note 3 using Tapatalk


Offline terry

  • Full Member
  • ***
  • Posts: 239
  • Karma: 32
Re: event_arrive = none and IRD
« Reply #2 on: June 15, 2018, 01:34:03 AM »
Don't think IRD react on option event_arrive for URS - it is URS (not IRD option).
It will load strategy (= set in RP annex option strategy=...) no matter what to event_arrive set
(or is RP loaded or not IRD decided based solely on RP option strategy, not on combination of option strategy+event_arrive).

URS should not run strategy loaded on such DN though but the reason - it not supposed to get calls on such RP at all if event-arrive=none (as in such case it does not register on such RP).

If URS handles calls on RP with event_arive=none, may be check is URS register on such RP or not.

Offline cavagnaro

  • Administrator
  • Hero Member
  • *****
  • Posts: 6547
  • Karma: 56332
Re: event_arrive = none and IRD
« Reply #3 on: June 15, 2018, 04:30:24 AM »
Verify the URS option name too, must be the exact URS application name

Enviado de meu E6633 usando o Tapatalk