Author Topic: Genesys Voice Platform (GVP) connection via T1 to Siemens HiCom 300 switch  (Read 3422 times)

rosshartford

  • Guest
We are attempting to connect a GVP box via Dialogic to a Siemens HiCom 300 switch.  We have it configured as T1-Robbed bit on the GVP side and have tried both loop start and wink start in the VPM configuration, with no luck.  Does anybody out there have a configuration for both the GVP side and the Siemens side that they would be willing to share?

Thanks!

Ross Hartford

Offline victor

  • Administrator
  • Hero Member
  • *****
  • Posts: 1403
  • Karma: 18
Hi,

I don't have Dialogic with our GVP (we use SIP), but if it will help you, I can email you our GVP config.
Vic

rosshartford

  • Guest
Well we got it working.  Below is the Siemens switch configuration.  BTW, use the pdk_us_ls_fxs_io configuration in the VPM setup.

---------------------------------------------------------------
| DETAILS OF TMD BOARD AT ADDRESS (LTG.LTU.SLOT) = z. y. xx
|                                                             |                
|    CABTYP =    3      TIMTYP = SYST       SIGTYP = CAS  
|     FRAME =  STD        TABS =   NO       FCTID  =   1      
|    BI8SUB =   NO      BIVDET =   NO                        
|-------------------------------------------------------------
|   RDRATIO =     6       RDTH =  2500      RDQUAL = 15000    
|    YLSEND =  5000       YLTH =   400      YLQUAL =   100    
|       LOS =   150        AOS =  4000                        
|  SESDISTH =    10   SESREQTH =    10                  
|  OESDISTH =    30   OESDISIN = 24-00-00              
|  OESREQTH =     4   OESREQIN = 04-00-00              
|-------------------------------------------------------------
|    NETUSR =           ACKTIM =            DLVTIM =          
|    OCTMAX =           RETMAX =            WINDOW =      
|    CRIDC  =           TTSC   =            NSFIV  =        
|    NSFTSC =           PFDGT  =                              
|------------------------------------------------------------
|       IGN =            IID =                                
---------------------------------------------------------------