I have configured 2 SIPSwitch and 2 TServer
SIPSwitch1
SIP port: 5099, DN: 8000, ERP: 5000
SIPSwitch2
SIP port: 5089, DN: 7000, ERP: 4000
I registered both DN with X-lite and using DN 7000 dial to 8000@SIPServer:5099, but it is failed.
********************************************************************************************
18:08:21.481 SIPCONN(7000): HandleSipDialogEvent(INVITE)
18:08:21.481 SIPCONN(7000): Capabilities 19d
18:08:21.481 SIPCONN(7000): new transaction
18:08:21.481 SIPCONN(7000): store remote content
18:08:21.481 SIPCONN(7000): verify sdp
18:08:21.481 SIPCONN(7000): sdp state SDP_STATE_NULL, event SDP_RECEIVED
18:08:21.481 SIPCONN(7000): new sdp state SDP_OFFER_RECEIVED, event SDP_RECEIVED
18:08:21.481 SIPCONN(7000): state e:10,p:0,s:1,c:9,rc:0,m:0
18:08:21.481:(1) SIPTR(1): complete
18:08:21.481:(1) SIPTR(0): Step 0 - SipTransactionCreateCall(1) complete
18:08:21.481:(1) SIPTR(0): Begin step 1 - SipTransactionResolveCallInfoByDialPlan(2)
18:08:21.481:(1) DialPlan: No DialPlan/Rule defined, using original destination '8000'.
18:08:21.481:(1) Number:[8000] is not internal, looking for service
18:08:21.481:(1) Number:8000 did not find any gateway with matching prefix to send this call to
18:08:21.481:(1) Unable to resolve number for DN:8000
18:08:21.481:(1) SIPDM: failed to get registration info for 8000
18:08:21.481:(1) SIPDM: failed to get registration info for 8000
18:08:21.481:(1) DialPlanResult: unknown condition type 5, ignored
18:08:21.481:(1) SIPTR(2): complete
18:08:21.481:(1) SIPTR(0): Step 1 - SipTransactionResolveCallInfoByDialPlan(2) complete
18:08:21.481:(1) SIPTR(0): Begin step 2 - SipTransactionRejectCall(3)
18:08:21.481 SIPCONN(7000): re-invite-called-initiated
********************************************************************************************
As I know, I need to configure a SIP to SIP trunk between the Switch, so that 2 DN can call with each other. However, after I created a Trunk on SIPSwitch2, it still failed. Can anyone guide me how to make this configuration?
Secondly, I use the T-Library to make call from DN 7000 (SIPSwitch2) to DN 8000 (SIPSwitch1) using RequestMakeCall with Location "SIPSwitch1" attribute, it failed. From the logs, it shows there is no DialPlan/Rule defined. Is it mean I need to configure DialPlan? But how and where to configure it?
********************************************************************************************
19:10:39.388 Trc 04541 RequestMakeCall received from [1680] (00000004 DesktopToolkitX 192.168.11.104:2786)
message RequestMakeCall
AttributeThisDN '7000'
AttributeOtherDN '8000'
AttributeLocation 'SIPSwitch1'
AttributeMakeCallType 0 (MakeCallRegular)
AttributeReferenceID 3
19:10:39.450:(1) DialPlan: No DialPlan/Rule defined, using original destination '995000'.
19:10:39.450:(1) Number:[995000] is not internal, looking for service
19:10:39.450:(1) Number:995000 did not find any gateway with matching prefix to send this call to
19:10:39.450:(1) Unable to resolve number for DN:995000
19:10:39.450:(1) SIPDM: failed to get registration info for 995000
19:10:39.450:(1) SIPDM: failed to get registration info for 995000
19:10:39.450:(1) DialPlanResult: unknown condition type 5, ignored
19:10:39.450:(1) ERROR: 10000029, DialPlanRejectCall(cause, responseCode, scenario, trData, result), SipCallManagerDialPlan.cpp,381
19:10:39.450:(1) ERROR: 10000029, DialPlanHandleConnect(scenario, trData,result,*instruction), SipCallManagerDialPlan.cpp,1078
19:10:39.450:(1) SIPTR(14): failed
19:10:39.450:(1) SIPTR(13): Step 0 - SipTransactionResolveCallInfoByDialPlan(14) failed
19:10:39.450:(1) SIPTR(13): failed
19:10:39.450:(1) SIPCM: transaction SipScenario failed
19:10:39.450:(1) CALLSTATE: empty, delete the call 3
19:10:39.450:(1) OnRequestFailed
19:10:39.450 Trc 36002 Request rejected: error code 71(Invalid Called Dn)
********************************************************************************************
