Author Topic: sip endpoints with 3pcc  (Read 5279 times)

Offline smile

  • Sr. Member
  • ****
  • Posts: 286
  • Karma: 6
sip endpoints with 3pcc
« on: January 19, 2012, 03:31:36 AM »
I'm looking for suitable sip endpoint with 3pcc mechanism enabled. On Genesys Discussion forum i found the exact name of this feature - "Broadsoft remote control talk event package".
What kind of softphones support it? I tried to use eyebeam, but in reply to notify event:talk it tell me "not acceptable here".
With best regards and so on

Offline genesysguru

  • Sr. Member
  • ****
  • Posts: 282
  • Karma: 11
    • Genesys Guru Blog
Re: sip endpoints with 3pcc
« Reply #1 on: January 19, 2012, 11:55:46 PM »
Have a look at Aastra or Snom IP Phones

Offline kolonil

  • Newbie
  • *
  • Posts: 4
  • Karma: 0
Re: sip endpoints with 3pcc
« Reply #2 on: January 25, 2012, 12:07:11 AM »
Also Polycom SoundPoint IP Phones supports Broadsoft extensions (talk, hold)

Regards,
Mike.

Offline smile

  • Sr. Member
  • ****
  • Posts: 286
  • Karma: 6
Re: sip endpoints with 3pcc
« Reply #3 on: January 25, 2012, 12:20:39 AM »
well, hard-phones is not interesting for us for some reasons. All that i found is bria 3 (not eyebeam) and very old version of snom 360 _softphone_ - it looks like had phone and support most features of it.
With best regards and so on

Offline borkokrz

  • Full Member
  • ***
  • Posts: 154
  • Karma: 6
Re: sip endpoints with 3pcc
« Reply #4 on: January 25, 2012, 06:42:14 PM »
Have a look at Yealink Enterprise IP Phones. They are cheap and also support 3pcc.

Offline tech12

  • Newbie
  • *
  • Posts: 16
  • Karma: 1
Re: sip endpoints with 3pcc
« Reply #5 on: February 02, 2012, 08:02:32 AM »
I believe Bria worked well with SIP Server. Doesn't Genesys recommend them, too(?)  ???

Offline rajee

  • Newbie
  • *
  • Posts: 8
  • Karma: 0
Re: sip endpoints with 3pcc
« Reply #6 on: February 02, 2012, 04:05:23 PM »
Bria works just perfectly fine. We have tested!!!

Offline clemouk

  • Newbie
  • *
  • Posts: 39
  • Karma: 0
Re: sip endpoints with 3pcc
« Reply #7 on: February 08, 2012, 03:34:37 AM »
The Genesys SIP Endpoint, also used by Interaction Workspace (if applicable), is based on the Bria SDK so there shouldn't be any problem using this - we've been using this for all our testing so that we can compare with IW as well.

Offline cavagnaro

  • Administrator
  • Hero Member
  • *****
  • Posts: 7458
  • Karma: 56330
Re: sip endpoints with 3pcc
« Reply #8 on: May 12, 2012, 07:13:02 AM »
Bria works just perfectly fine. We have tested!!!
can you detail more on this??? How does your tests worked out? Which ones did you test?