Genesys CTI User Forum
Genesys CTI User Forum => Genesys CTI Technical Discussion => Topic started by: Blah on August 09, 2006, 03:06:47 AM
-
[color=Green]summary of layout[/color]
I have two t-servers with say 100 seats on t-server A and 100 seats on t-server B. I have total license for 200 seats.
t-server a has dn range 2000-2099
tserver b has dn range 3000-3099
For disaster recovery purposes, both pbxes have both pbx a and pbx b extensions:
pbx a : 2000-3099
pbx b: 2000-3099
number-of-license for both ts a and ts b is set to 100.
[color=Green]questions [/color]
I tried to set number of license to 200 on both t-servers but license manager would not let me. >:(
how can I tell ts a to use 2000-2099 and then use 3000-3099 in case ts b is not there? Is there a way? ???
-
no can do....
tserver will only take out licenses when it starts if you have 200 dn's configured and 100 sdn licenses only 100 dn's will get registered..
-
no can do....
tserver will only take out licenses when it starts if you have 200 dn's configured and 100 sdn licenses only 100 dn's will get registered..
-
You might be able to add the extentions from PBX A to t-Server B and then disable them. And of course the other way round.
Then in a disaster you could simply stop 1 T-Server, give it all 200 licences and then enable the extensions.
I say this might work, as I have not tried it for myself.
Steve
-
I should have said "stop 1 T-Server, [color=Red]give the other one[/color] all 200 licences and then enable the extensions.
-
I wonder if decreasing number-of-license on one TServer during runtime will enable you to increase the number of license on the other one.
I will check and get back to you.