Genesys CTI User Forum

Genesys CTI User Forum => Genesys CTI Technical Discussion => Topic started by: cshah on August 06, 2008, 07:23:57 PM

Title: MAXIMUM Lines on a GVP-IP Standlone Box for SIP or ISDN PRI
Post by: cshah on August 06, 2008, 07:23:57 PM

All,

We have Genesys GVP (Standalone) in our environment and currently using ISDN PRI. We are considering the Genesys GVP (Stand along config with SIP Trunks from the Career).

Questions:
How many lines can run Gracefully in one WinTel  (Xeon Core 2 Duo, 2 CPU Server)? - SIP Config

How many lines can run Gracefully in one WinTel  (Xeon Core 2 Duo, 2 CPU Server)? - ISDN PRI CONFIG with Dialogic

Thanks,
Chirag

Title: Re: MAXIMUM Lines on a GVP-IP Standlone Box for SIP or ISDN PRI
Post by: CTIgem on August 06, 2008, 07:59:33 PM

Don't know about SIP but we have GVP 6.5 with Dialogic 96 ports and Xeon 4 cpu, it holds fine.
I believe dialogic is doing bulk of work.

Title: Re: MAXIMUM Lines on a GVP-IP Standlone Box for SIP or ISDN PRI
Post by: RN on August 10, 2008, 06:59:56 PM

With a SIP configuration a single instance of IPCS can support upto 300 ports with DTMF and 200 ports with ASR\TTS.

cheers...rn

Title: Re: MAXIMUM Lines on a GVP-IP Standlone Box for SIP or ISDN PRI
Post by: René on August 10, 2008, 07:28:45 PM

Hi,

Detailed information about GVP capacity and sizing (Windows, Linux, TDM, SIP etc.) could be found in "Genesys 7 Hardware Sizing Guide".

R.

Title: Re: MAXIMUM Lines on a GVP-IP Standlone Box for SIP or ISDN PRI
Post by: chilushah on December 09, 2008, 06:58:20 PM

Thanks guys!...