Genesys CTI User Forum
Genesys CTI User Forum => Genesys CTI Technical Discussion => Topic started by: cjrennie on September 29, 2008, 04:58:14 PM
-
Has anyone connected a X-Lite application to the Genesys SIP Server applications. If so any networks connections and setup document available?
Thanks
-
It is as any other SIP Proxy, nothing special.
-
Pretty much, but here is how mine is set up (because it isnt straightforward)
Options->SIP account settings->properties
Display Name = (DN)
User Name = (DN)
Password = (blank)
Autherisation used name = (blank)
Domain = (server your sip tserver is on:5060 unless you defined it to be something else in TServer)
Tick Register with domain and receive incoming calls
Radio - domain
Leave all the rest the same.
X-lite version 3.0 build 29712
-
Thanks to all have it working
-
Hi All,
I'm using X-lite 3.0 too.
But there is no any interaction between X-lite and the SIP server, I'm getting the following issue: "registration error:408 Request Timeout"
Can you help please.
I'm configuring my own Genesys Lab environment
Regards.
-
If you want to use the X-lite as the customer side, just turn off the registration on X-Lite level. In any other case, you have to configure the DN accordingly X-Lite configuration
-
thanks for your comment.
My issue was that I was using a wrong sip port (the one in the command line (2020) instead of the one mentionned in the sip-port (5065))
Regards.
-
X-Lite is good - it was good even 10 years ago. The Bria 5 push that comes along with it is less of a good. Turn off the self-register on X-Lite and you will be golden.