Genesys CTI User Forum
Genesys CTI User Forum => Genesys CTI Technical Discussion => Topic started by: JJ on January 01, 1970, 12:00:00 AM
-
Hi all,
pls assist. can IR take the call back from the Nortel musiconhold port after it checked that an agent has become available? And how. thanks.
jj
-
Of course!
The whole idea of a Music on Hold is that you have a call parked on a music loop only while waiting for the next available agent.
I think you are using a wrong function in ICD (are you using G6 or G5?) do no use Treatment function. The treatment function is only to be used when you REALLY want to route your call to the music port for the period of time sepcified in the function.
The best way to do it is to use "Treatments" inside one of your "Target Selection" objects (it looks like a bullseye and says "routing" on it)
In case of Meridian, under the "Busy" page in that object, click on "Use Treatments", add your new treatment (music), set the route number for the music port, click on apply compatible treatment, set the maximum time for this treatment to be applied (36000), and then in "Target Selection" page, add your target, the maximum time your call should wait for this target, virtual queue for the call to be parked in while waiting for the target, and you should be fine...
Tell me if you still cannot get it.
Vic
-
Yes,
You route the call to the music port (23 for ex) this action is done in fact by a busy traitement. Genesys use TgiveTraitementmusic and take the call when a target becom ready.
It' working in 5.1 and 6.1 but for 6.1 you need ird 6.5 to have variables inside the target select
Karim
-
How do you register a music DN in CME? I try to register mine as a music DN and get the following error:
DN:type:cause 59:0xb1:0x0708
Bad DN type for DN registration
Something need to change on the switch?
-
You don't have to register it :)
Just mention it in the place inside IRD Treatment object!