Genesys CTI User Forum
Genesys CTI User Forum => Genesys CTI Technical Discussion => Topic started by: JJR on March 18, 2011, 05:36:21 PM
-
Hi,
The connection between T-server & Switch going down frequently these days. I have seen the below error in T-server lgos whenever link goes down. Could you please help me out what could be the reson. Any information will be appreciated.
T-server log:
** link[1] <TS-Primary> ** 13:11:01.1281
13:11:01.153 Std 31014 Error Notification: Link[1], reason [No reply to heartbeat]
(link_stop) link [1] 'link-tcp' stop
(tcp_stop) closed on [22]
-- link[1] @13:11:01.2971 -- TCP/IP connection closed --
13:11:01.297 Std 31011 Disconnected: Link[1], reason [TCP/IP connection closed]
Status value (1):
New status: (0) LinkDown - no TCP/IP connection
Old status: (5) LinkUp, auto_register done
[1] DN 52013 - State: 'Start'
[1] DN 52712 - State: 'Start'
[1] DN 51629 - State: 'Start'
Logs at Switch Side:
13:04:38 WARNING brsdrv.2 CTIserver/35005 Bri2 Link2 C=1 BM_ERROR
NoReplyToHeartbeat
13:04:38 FYI brping.2 CTIserver Bri2 Link2 Reachable
13:05:04 FYI brsdrv.2 CTIserver/41053 Bri2 Link2 CONNECTED
13:05:04 FYI brsdrv.2 CTIserver/41053 Bri2 Link2 L1_UP
-
Seems like a network problem. Can you have your network admins install a packet sniffer and see what's breaking the tcp links?
-
Completely agree, maybe the NIC is bad, maybe the 2 servers are on WAN and WAN has disconnections or even on LAN too much broadcast/traffic and makes the link go down, what is sure is that this should be seen on both, TServer and PBX, sides.