Genesys CTI User Forum
Genesys CTI User Forum => Genesys CTI Technical Discussion => Topic started by: kateemail on February 24, 2015, 10:28:04 PM
-
my team is utilizing 8.0.1 right now, and we have this issue that keeps popping up. Members when undocking can find that the options just disappear. When i look at their CCPulse, I have tried the key command and selecting 'view/object/etc.' from the view menu and still nothing appears.
We have encountered a similar issue in previous versions and have only found that re-installing has corrected this, but I'm thinking there has to be a better way. I've tried modifying their screen options in general to ensure everything is appearing correctly and it's not being cut off at all, no dice. I tried looking at the config files for the users and found a bunch of discrepancies, so there was no real alignment to try as far as set up that i could see.
Has any one else found this issue?
Thanks!
-
Q: What do you mean "undocking"?
You might want to check your Persons/Agents Roles/Permissions within CME/CIM/GA, specifically for CCP+. Just to make sure whoever is logged in has the necessary Access levels to see, make and do the actions you've described... but that's a pretty basic check.
-
Try to upgrade to last version and enable CCPulse logs.
Also post a screenshot of your issue to understand better
-
the users previously had the options of objects, view, and extended status in the bar on the left, so shouldn't be a permissions issue. i've attached a link to screen shot that shows what I mean by docking....essentially the floating views bar in teh screen shot is now just gone for the users....it's like they have floated it away and it can't be retrieved...
[img width=640 height=398]http://i.imgur.com/fBXT8Lr.png[/img]
-
What Is View menu selected? Press F7 F8 and F9