Genesys CTI User Forum

Genesys CTI User Forum => Genesys CTI Technical Discussion => Topic started by: Campfire on August 24, 2015, 11:38:36 AM

Title: URS Log shows the selected target as invalid although target is ready
Post by: Campfire on August 24, 2015, 11:38:36 AM

Hi,

URS log shows as below:

    _M_I_2c1e026ce96db1df [10:0c] tenant Resources Agent INSMBH: dn 7281006 (d 1) is ignored: other dn type(cfg)
    _M_I_2c1e026ce96db1df [10:0c] tenant Resources Agent INSMBH: dn 7281506 (d 2) is ignored: other dn type(cfg)

and I just want to know why the target is invalid and what's wring with his profile?

Title: Re: URS Log shows the selected target as invalid although target is ready
Post by: Kubig on August 24, 2015, 11:40:45 AM

You have to post fragment of URS logs covering the checking of target state for find out what was the root-cause. Your fragment is not related to the root-cause

Title: Re: URS Log shows the selected target as invalid although target is ready
Post by: terry on August 26, 2015, 04:34:16 AM

agent has ready DNs (7281006 and 7281506) but call 2c1e026ce96db1df (or startegy nadling this call make corresponding settings) can not be routed to any DN of type 1 (extension) or 2 (ACDPosition). Either it is not voice call or strategy set for this call some other DN type.