" /> Feature NotSupported ISERVER72/IVR - Genesys CTI User Forum
« previous next »
Pages: [1]   Go Down

Author Topic: Feature NotSupported ISERVER72/IVR  (Read 3860 times)

This topic contains a post which is marked as Best Answer. Press here if you would like to see it.

docherp

  • Guest
Feature NotSupported ISERVER72/IVR
« on: September 28, 2006, 01:59:29 PM »
Advertisement
Call is released with this message. I have this working well on a local model, then attempted on remote system but fails. All looks identical, all s/w identical.
Logged

Offline Adam G.

  • Hero Member
  • *****
  • Posts: 552
  • Karma: 12
  • Still Gorgeous.......
Re: Feature NotSupported ISERVER72/IVR
« Reply #1 on: September 28, 2006, 02:13:33 PM »
Can you tell us which IVR you are using, which PBX and if it's TDM or IP?

Regards,

Pavel
Logged

docherp

  • Guest
Re: Feature NotSupported ISERVER72/IVR
« Reply #2 on: September 28, 2006, 03:54:03 PM »
S/W =IVR_SERVER, ISERVER, PREMISE TSERVER7.2, on IVR MPS5000 (Nortel, previously Periphonics) using a SunFireV210/Solaris10. DMS100 - Nortel Switch - IP. Configured a driver "peri_1" in CME with ports 1-31. This can be caused by typo's but looks fine. Suggestion by Genesys we should use Port 0, but working model starts on Port 1.
Logged
Marked as best answer by on September 14, 2025, 06:37:01 PM

docherp

  • Guest
Re: Feature NotSupported ISERVER72/IVR
« Reply #3 on: September 29, 2006, 08:25:53 AM »
  • Undo Best Answer
    • Configured as Virtual Switch fir IVR In-front
    Logged

    docherp

    • Guest
    Re: Feature NotSupported ISERVER72/IVR
    « Reply #4 on: October 12, 2006, 09:08:41 AM »
    Problem solved, basically a complete a mismatch/alignment of lines configured in CME with ACD Positions being incorrect, you must start at 1 and not zero. Configured 16 to start with (1-16) after finding that we were supplied with incorrect ACD Positions. Restarted tappman on MPS IVR, the the mps driver and set all configs set start at 1.
    Logged
    Pages: [1]   Go Up
    « previous next »