Genesys CTI User Forum > Genesys CTI Technical Discussion

Two Tservers connected to Symposium

<< < (2/2)

Suleyman Kundak:
CFG of the first TServer

[extrouter]
defaultdn=
reconnect out=5
register out=60
request out=10
routedn=
timeout=30

[logcontrol]
loguffering=false
logcheckinterval=60
logfile ame=e:\gcti\logs\tserver.txt
logfilesize=10000000
log emoveoldfiles=false

[tcpoptions]
hostname=Meridian
port=3000
protocol=tcp

[TServer]
attachcdninfo=on
check enantprofile=false
compatibilityport=3010
completexferondisc=on
hexdump=yes
internaladdrlength=
licensefile=7260@10.6.100.193
link1 ame=tcpoptions
link imeout=
log raceflags=on
mail ame=MeridianMail
managementport=3001
max runk umber=
mlinkapplicationid=Meridian
mlinkcustomer umber=0
mlinkhostid=Lanlink
mlinkpollinterval=0
mutexfermethod=2step
nocalldisconnect=3
nocallid elease=on
nrdyafterlogin=off
numoflicenses=210
origcallxferinit=xfer
rlsextconsult=on
serverid=2
setdnisfromdest=off
verbose=true
version=5
wrongcallid elease=off

[x25options]
comport=
mode=svc
protocol=x25
restartdelay=
template=
userdata=
x25address=
x25device=
x25localaddr=

CFG of the second TServer
[extrouter]
defaultdn=
reconnect out=5
register out=60
request out=10
routedn=
timeout=30

[logcontrol]
loguffering=false
logcheckinterval=60
logfile ame=d:\gcti\logs\tserver.txt
logfilesize=10000000
log emoveoldfiles=false

[tcpoptions]
hostname=Meridian
link umber=0
port=3000
protocol=tcp

[TServer]
attachcdninfo=off
check enantprofile=false
compatibilityport=3010
completexferondisc=off
hexdump=yes
internaladdrlength=
licensefile=c:\flexlm\license.dat
link1 ame=tcpoptions
link imeout=
log raceflags=on
mail ame=MeridianMail
managementport=3001
max runk umber=
mlinkapplicationid=Meridian1
mlinkcustomer umber=0
mlinkhostid=Lanlink
mlinkpollinterval=0
mutexfermethod=fast
nocalldisconnect=3
nocallid elease=on
nrdyafterlogin=off
numoflicenses=210
origcallxferinit=xfer
rlsextconsult=on
serverid=1
setdnisfromdest=off
verbose=true
version=5
wrongcallid elease=off

[x25options]
comport=
mode=svc
protocol=x25
restartdelay=
template=
userdata=
x25address=
x25device=
x25localaddr=

Hope it helps

Victor:
I have never seen this:
licensefile=7260@10.6.100.193

In other words you can just specify a port where license manager is running instead of a path to a license file??? That would be REALLY great! Does it work on 5.xxx?

Ed:
Just wondering what the 2 cfg's are showing other than server id being different and link number under switch ( which implies seperate links ). With Symposium you can run 2 tservers against same link ( listens on port 3000 ) as long as Monitored DN's etc are different ( otherwise why run 2 tservers ) and under server info tab in cme for tserver(s) the ports are different. Just wondering? good info though.

Suleyman Kundak:
yes it works without a problem.

Navigation

[0] Message Index

[*] Previous page