Hi,
for all of you who are working with Avaya, I was wondering if you could help me with the following:
We are using URS to route the call to an operator. Because we are using a bit more than usual routing, when putting a call into queue, we have to:
send the call to a music port using IVR Treatment Icon and then do the usual SelectDN, Route commands.
We need to send the call to music port in order to have caller listen to music while his call is queued in a VQ. The timeout for IVR treatment is set to 1 second in IRD, while the actual music port will play music for up to 60 minutes before dropping the call.
Let's say we have:
Routing Point 21000 which is running the strategy.
Music Port at 22000 where the call would be listening to the music
Virtual Queue VQ_Panda where the call would be queued while waiting to be connected.
So, when the call enters the strategy, we have EventRouteRequest for 21000 where strategy will start.
This strategy will direct the call to music port 22000, and after one second will continue to on and queue the call at VQ_Panda.
Physically, the call is still at 22000, listening to the music, while for Genesys the call is actually in VQ_Panda, 21000 and 22000.
When URS switches over to backup, we have on_router_activated set to default, thus URS_Backup would force all the existing calls handled by URS to default. And this is where the stuff happens the way we did not anticipate:
1. EventDiverted for VQ_Panda
2. RequestRouteCallis issued for ThisDN=22000 with otherDN = "" type:RouteTypeDefault.
3. EventRouteUsed is returned with ThisDN = 22000, OtherDN = my cell ANI, ThirdPartyDN = '' <- in other words, call did not go anywhere and stayed on 22000
and this is it!!!
Which is totally messed up, because, 22000 is a music port, so having call just left there means that Genesys is no longer seeing that call, and caller is just stuch listening to the loop, unaware that he is no longer queued anywhere.
in URS option, we clearly state that: default_destination = 20200, so the least it should do is route the call to 20200, right?!!!
I am sure I am not the only one who is facing the problem.
How is everyone setting their music VDNs so that in case of URS failure or error, the call is no longer stuck listening to the music and never be routed?
Any thoughts?
