" /> Disconnect alarm issue. - Genesys CTI User Forum

Author Topic: Disconnect alarm issue.  (Read 1617 times)

Offline vjicecool

  • Full Member
  • ***
  • Posts: 127
  • Karma: -1
Disconnect alarm issue.
« on: September 01, 2017, 10:51:14 PM »
Advertisement
Hi Folks

i noticed an issue and i would like your prespective

URS and interaction server are connected ( URS Connection -> iXN server)
URS has addp connection to IXN with local time out 90 and remote time out 180.


Below is the alarm email generated

Connection to TServer 'ixnserver_lam_p' at host 'ixnhost', port 7030 lost

Connection Failure detected by lam_urs_p

More detail:
    Alarm:        Connection Failure
    Severity:    Major
    DBID:        101

Reporting Application:
    Name:      lam_urs_p
    Type:      RouterServer
    DBID:      115



log snipped from URS

14:22:01.385 Std 04504 Connection to TServer 'ixnserver_lam_p' at host 'ixnserverhost', port 7030 lost
14:22:01.463 Std 04503 Connected to TServer 'ixnserver_lam_p' at host 'ixnserverhost', port 7030


if we have ADDP set to 90 and 180 why did we get an alarm only if there is a disconnect for 78 milli seconds



Offline terry

  • Sr. Member
  • ****
  • Posts: 328
  • Karma: 35
Re: Disconnect alarm issue.
« Reply #1 on: September 02, 2017, 02:32:07 AM »
???
addp not expected to mask disconnects.
if disconnect happen it will be reported immediately (at 14:22:01.385), no matter how soon in future connection will be restored - in 1 milisec or in 1 hour (and doesn't matter what are addp settings)