" /> G.711 ptime=5 - Genesys CTI User Forum
« previous next »
Pages: [1]   Go Down

Author Topic: G.711 ptime=5  (Read 1511 times)

Offline genesysguru

  • Sr. Member
  • ****
  • Posts: 293
  • Karma: 12
    • Genesys Guru Blog
G.711 ptime=5
« on: November 19, 2018, 09:26:16 AM »
Advertisement
Is it possible to change the G.711 ptime to 5ms? I can't find any MCP option to do this on G.711. Also Genesys documentation states the minimum prime they support is 10ms for other codecs however the standards say ptime is a multiple of 5ms so 5ms is valid.
Logged

Offline Kubig

  • Hero Member
  • *****
  • Posts: 2755
  • Karma: 44
Re: G.711 ptime=5
« Reply #1 on: November 19, 2018, 12:10:19 PM »
If i recall well, MCP allows you to set ptime at minimum to 10ms, not 5ms. I'll check it on the latest version of MCP and let you know
Logged

Offline Kubig

  • Hero Member
  • *****
  • Posts: 2755
  • Karma: 44
Re: G.711 ptime=5
« Reply #2 on: November 19, 2018, 03:50:20 PM »
It is not possible to set ptime parameter to value 5ms (MCP will not start if you set this value  :()

Valid Values: Choose between: 0, 10, 20, 30, 40, 60, 80 or 100
Logged
Pages: [1]   Go Up
« previous next »