Author Topic: How to send attached variable form IRD to Composer  (Read 364 times)

Offline Gautham

  • Jr. Member
  • **
  • Posts: 55
  • Karma: -1
How to send attached variable form IRD to Composer
« on: January 06, 2020, 07:44:56 PM »
Hi All,

I have developed one IRD strategy where I am assigning and attaching a variable  as KVP. After i am using Troute function to divert the call to Trunk group. There is a callflow associated with this TG.

The IRD attached variable(KVP) I like to use in GVP call flow. I tried by using assign block. But the value is not getting assigned.

Kindly help me out.

Thanks,
Gowtham

Offline cavagnaro

  • Administrator
  • Hero Member
  • *****
  • Posts: 7203
  • Karma: 56330
Re: How to send attached variable form IRD to Composer
« Reply #1 on: January 06, 2020, 11:41:32 PM »
Check deployment guide for URS centric based mode. There are a few configurations to be done before. Post at least your configuration and logs for that call.


Enviado de meu SM-N9600 usando o Tapatalk


Offline Raja Sekhar

  • Jr. Member
  • **
  • Posts: 70
  • Karma: -1
  • Genesys Routing Applciation developer
Re: How to send attached variable form IRD to Composer
« Reply #2 on: January 17, 2020, 06:04:11 PM »
may be refer the option called userdata-map-filter, which is responsible for carrying userdata between route point and (trunk groups , voip DN's). Configure the value of options as * or prefix of the userdata that should be sent.
refer SIP deployment doc.
Rajasekhar YHS,
rajasekharlbit@gmail.com,
+0046-766951543