" /> URS Log shows the selected target as invalid although target is ready - Genesys CTI User Forum
« previous next »
Pages: [1]   Go Down

Author Topic: URS Log shows the selected target as invalid although target is ready  (Read 2548 times)

Offline Campfire

  • Jr. Member
  • **
  • Posts: 73
  • Karma: 0
  • If you must blink, do it now.
URS Log shows the selected target as invalid although target is ready
« on: August 24, 2015, 11:38:36 AM »
Advertisement
Hi,

URS log shows as below:

    _M_I_2c1e026ce96db1df [10:0c] tenant Resources Agent INSMBH: dn 7281006 (d 1) is ignored: other dn type(cfg)
    _M_I_2c1e026ce96db1df [10:0c] tenant Resources Agent INSMBH: dn 7281506 (d 2) is ignored: other dn type(cfg)

and I just want to know why the target is invalid and what's wring with his profile?
Logged

Offline Kubig

  • Hero Member
  • *****
  • Posts: 2755
  • Karma: 44
Re: URS Log shows the selected target as invalid although target is ready
« Reply #1 on: August 24, 2015, 11:40:45 AM »
You have to post fragment of URS logs covering the checking of target state for find out what was the root-cause. Your fragment is not related to the root-cause
Logged

Offline terry

  • Sr. Member
  • ****
  • Posts: 328
  • Karma: 35
Re: URS Log shows the selected target as invalid although target is ready
« Reply #2 on: August 26, 2015, 04:34:16 AM »
agent has ready DNs (7281006 and 7281506) but call 2c1e026ce96db1df (or startegy nadling this call make corresponding settings) can not be routed to any DN of type 1 (extension) or 2 (ACDPosition). Either it is not voice call or strategy set for this call some other DN type.
Logged
Pages: [1]   Go Up
« previous next »