Genesys CTI User Forum > Genesys CTI Technical Discussion

MultiSite TServer Configuration

(1/2) > >>

john:
Can anbody help?
We want to transfer calls via the PSTN from one location to another, both sites have TServer. The call will come through an IVR then transfer out of the IVR to a DN with RLT configured. (this should not be a factor in the scenario)
Can the 2 TServers negotiate the message exchange necessary for a screen pop when the voice has been routed over the PSTN? The switches are not networked.
Any help is appreciated.
Thanks
John (CTIGUY)

Ray:
It is possible if you have :
1.A license for external routing
2. The 2 Tservers on the same network
3. Each Tserver must contain the other in it's CME connection tab.
4. The access codes are defined in the switch config under resources in the CME
5.You are using external route points in CME and your strategy.

Victor:
You will also need a Network Overflow Manager or IR to transfer the attach data between the TServers.

Philou:
Hi,
Can you explain what is it the Network Overflow Manager... I know IR in the GENESYS suite.
It's a product in this suite ?
Thanks.

Jim:
NOM allows attached data to be passed site to site in a multisite enviroment.
We are using Avaya/Lucent switchs and external router does not work in our enviroment and we do not use IR. NOM was the solution to pass IVR attached data on interflowed calls.
It's a bit of pain to set up but works fine.

If you want more details let me know.

Jim

Navigation

[0] Message Index

[#] Next page