" /> Dialogic D120JCTNew VTO ports config help needed - Genesys CTI User Forum
« previous next »
Pages: 1 [2]   Go Down

Author Topic: Dialogic D120JCTNew VTO ports config help needed  (Read 15791 times)

Sean H

  • Guest
Dialogic D120JCTNew VTO ports config help needed
« Reply #15 on: January 01, 1970, 12:00:00 AM »
  • Best Answer
    • Advertisement
    Tony,

    I have just noticed the following in CCPulse.........

    When i ring 53357, in CCPulse 53323 lights up aswell and the same in reverse.
    There 2 numbers are into diferent dialogic ports.

    53332 and 53358 are both fine.

    Does this help you at all ?

    Sean
    Logged

    Tony Tillyer

    • Guest
    Dialogic D120JCTNew VTO ports config help needed
    « Reply #16 on: January 01, 1970, 12:00:00 AM »
  • Best Answer
    • Sean,

    I would suggest that your ACD Ports and CME settings are misaligned, in some way. That is, your DN, Place and/or ACD Ports will require scrutiny, to ensure they reflect the same values;

    Do you have Places associated to all (12) of your VTO DN's?
    Are your (12) "VTO" Places related to the right DN's?
    Do you have a Group of Places relating to VTO and are all (12) VTO Places added to that Group of Places?
    Does your Strategy call your VTO Group of Places or does it call indivdiual Places on which to play announcements? If they are called individually, have you incldued the new Places in the Strategy?

    Tony
    Logged

    Sean H

    • Guest
    Dialogic D120JCTNew VTO ports config help needed
    « Reply #17 on: January 01, 1970, 12:00:00 AM »
  • Best Answer
    • Tony,

    I have just checked all the PLACES and the VTO ports and they are setup correctly.
    I see the 2 ports light up (53323 & 53357) in CCPulse when i ring either of these 2 numbers.

    Sean
    Logged

    Sean H

    • Guest
    Dialogic D120JCTNew VTO ports config help needed
    « Reply #18 on: January 01, 1970, 12:00:00 AM »
  • Best Answer
    • Tony,

    Phone point 1 RJ45
    ----------------------------
    RED--------GREEN
    WHITE-------BLUE

    Phone point 2 RJ45
    ----------------------------
    RED--------WHITE
    WHITE-------RED

    Have i get my "Tips and Rings" the wrong way around ??
    Logged

    Sean H

    • Guest
    Dialogic D120JCTNew VTO ports config help needed
    « Reply #19 on: January 01, 1970, 12:00:00 AM »
  • Best Answer
    • apologies.....meant to say rj14 !!!
    Logged

    Tony Tillyer

    • Guest
    Dialogic D120JCTNew VTO ports config help needed
    « Reply #20 on: January 01, 1970, 12:00:00 AM »
  • Best Answer
    • Telling me the cabling colours is a bit misleading, since they could be anything really perhaps trial and error would help you?

    Again, I would also check your strategies and perhaps your default port/route (if you have one, remove it temporarily as you redial the 2 faulty ports, then reapply it after testing...)

    There is not much else I can advise, without getting my hands dirty! :)

    Tony
    Logged

    Sean H

    • Guest
    Dialogic D120JCTNew VTO ports config help needed
    « Reply #21 on: January 01, 1970, 12:00:00 AM »
  • Best Answer
    • Tony,

    Many thanks for all your help, as i have managed to get them all working.

    The cables were wrong and they were plugged incorrectly so we are all up and running now many thanks.
    Logged

    Tony Tillyer

    • Guest
    Dialogic D120JCTNew VTO ports config help needed
    « Reply #22 on: January 01, 1970, 12:00:00 AM »
  • Best Answer
    • Glad to have helped!

    Tony
    Logged
    Pages: 1 [2]   Go Up
    « previous next »