" /> setting up remote agent aren't on site with a switch and a t-server. - Genesys CTI User Forum
« previous next »
Pages: [1]   Go Down

Author Topic: setting up remote agent aren't on site with a switch and a t-server.  (Read 4083 times)

Prashanth Merugu

  • Guest
setting up remote agent aren't on site with a switch and a t-server.
« on: June 29, 2009, 05:41:29 AM »
Advertisement
Hi

This would be something like an agent who has a dedicated telephone number which is setup in Genesys so calls can be routed to it... and the dedicated phone line might be connected to a smart-phone which is linked to a computer (so the computer can control/monitor the phone)...  and then the computer could also have data connectivity to the Genesys server(s)... I am looking for any/all possibilities on how to setup remote agents who aren't on site with a switch and a t-server.

Please let me kow if it is possible to setup agents like above scenario.

Regards
Prashanth Merugu
Logged

Offline ecki

  • Sr. Member
  • ****
  • Posts: 329
  • Karma: 8
Re: setting up remote agent aren't on site with a switch and a t-server.
« Reply #1 on: June 29, 2009, 05:46:41 AM »
Hi,

You can use Genesys Expert agent solution or SIP based solution.
Logged
Marked as best answer by on April 10, 2025, 11:13:45 AM

Prashanth Merugu

  • Guest
Re: setting up remote agent aren't on site with a switch and a t-server.
« Reply #2 on: June 29, 2009, 06:09:41 AM »
  • Undo Best Answer
    • Hi

    Thanks for the Reply.Can you help me on how to go about the deployemnt of same and also do we need purchase the Software from Genesys for the same.

    Presently we are using Genesys Frame Work 7.2 with  Multi site routing with 5 sites installed with Tservers and switches.we are planning to come up with a site with above solution.

    Thanks in advance

    Regards
    Prashanth Merugu
    Logged
    Pages: [1]   Go Up
    « previous next »