" /> 2 TServers with same Symposium Link - Genesys CTI User Forum

Author Topic: 2 TServers with same Symposium Link  (Read 4816 times)

This topic contains a post which is marked as Best Answer. Press here if you would like to see it.

Thomson

  • Guest
2 TServers with same Symposium Link
« on: January 01, 1970, 12:00:00 AM »
Advertisement
Does anyone know of any issues with having 2 TServers pointing to the same Symposium link. No DNs are defined in both switches associated with the TServers.

KM

  • Guest
2 TServers with same Symposium Link
« Reply #1 on: January 01, 1970, 12:00:00 AM »
I did not know two TServer can connect to the same link.
I am a little bit concerned with how are you planning to connect to SL, because you would need to specify link_number and as far as I know, you cannot have two clients connect to the same link in SL.

Why are you trying to do it?

Thomson

  • Guest
2 TServers with same Symposium Link
« Reply #2 on: January 01, 1970, 12:00:00 AM »
I need to have a test enviroment setup, which points to the same switch. This test TServer must not monitor or interfere with any of the production DNs. This would only be possible by defining a seperate switch object in CME.

urt

  • Guest
2 TServers with same Symposium Link
« Reply #3 on: January 01, 1970, 12:00:00 AM »
There is no problem, you can go to 16 (max) Tserver on the same S.L. The only option that you need to change is:

applicationid

Each tServer must have a different name and cannot monitored the same DN and CDN

URT

Marked as best answer by on July 17, 2025, 01:47:25 PM

Karl

  • Guest
2 TServers with same Symposium Link
« Reply #4 on: January 01, 1970, 12:00:00 AM »
  • Undo Best Answer
  • I guess this defeats the purpose of 2 Tserver and 2 MLinks for HA. (if you cannot monitor the same CDN and DN)
    We had a similar problem, however we have shelved plans for this next few months until we have additional projects settled down.